PDA

View Full Version : Length of Engine Control Cables


kkuhlmann
04-04-2009, 08:43 pm
I own a 1988 Catalina 34 Model C-34 with a 23 HP Universal Diesel engine.

I was able to find the size of cable in need from Edson but they did not know the length. Could someone tell me the length.

Ken Kuhlmann

Ken13559
04-05-2009, 02:32 am
1st you got to establish how the control cables are run, then measure it along the way section by section and sum up. Then add say 10-15% length. You can't go wrong having it longer but get's it short and it'll cost you another purchase !!

sailingdog
04-05-2009, 03:57 am
If your boat has the stock controls and stock engine, why not ask Catalina. They should know what length engine control cables went into the boat they built, and unlike many other manufacturers, they're still in business.

Stu Jackson
04-05-2009, 10:43 am
here: http://c34.org/bbs/index.php/board,11.0.html

Glenn Henderson
04-05-2009, 11:51 am
Ken,

All the other post covered anything I could add. Good Luck!

j_schoenfeld
04-05-2009, 07:40 pm
The old cable will have the length stamped in the side of the cable......