View Full Version : R-33 turnbuckle?
I,m reinstalling my standing rigging and I,m missing the turnbuckle for the aft stay, does anyone know the size needed? Please keep in mind that 'tb's' have a fully open size and a fully closed size, or just let me know the actual dimension from pin to pin on your boat. Thanks, Ray
Also, my mast length is ~ 40'-5" which I believe is the tall rig.
Hey, I still need this (?) answered, any body out there? Also, I was doing a load test on the boat in the slip and the engine would not rev above ~ 1200 rpm. I believe it's the prop(On an atomic 4), What combination do you have on your R-33 and what kind of rpm's do you get? Oh, what I have is a "Cambell------", I could not read the second word, but the dia. is 12", not sure about the pitch, But it looks pretty flat. A friend suggested it is probably a "Cambell Sailor". I saw this prop advertised in a mag. as designed for an atomic 4. But that's a very general statement and I couldn't find the ad again to follow up.*o Ray
Desmond
04-16-2008, 04:51 am
The tb on my backstay is 8 3/4 long. Hope that helps